Planning a route using the map
Important: In the interest of safety and to avoid distractions while you are driving, you should
always plan a route before you start driving.
To plan a route using the map, do the following:
1.
Move the map and zoom in until you can see the destination that you want to navigate to.
2.
When you have found your destination on the map, select it by pressing and holding the screen
for about one second.
A pop-up menu shows the nearest address.
3.
To plan a route to this destination, select Drive/Ride depending on which device you are using.
Tip: You can also select a map symbol to open the pop-up menu, then select the Drive/Ride
button to plan a route to that location.
Tip: You can save a route using My Routes.
To Next Page
Loading...
