Elevation set-out is completed. Set
out the next ground point.
• When in this menu and setting-out has already been taken (for
the second or subsequent reading):
Step 4: The previous backsight measurement will be displayed
and the program skips to step 5.
• Storing backsight elevation:
Step 3: Even after power off, backsight elevation is stored.
Since this value is the same as the value in the
elevation measurement mode, the backsight elevation
is stored to whichever mode is set last. (See "10.
Measuring Elevation".)
• Storing setting out elevation
Step 6: Even after power off, elevation is stored.
Notes:
To Next Page
Loading...
