Topcon DL-503 - 17 Warnings and Error Messages

60
Other Procedures
17. Warnings and Error Messages
The table below shows the warnings and error messages displayed by
the DL-502/503 and describes the cause of each warning or error
message.
Error Message Coded Message Meaning
E400
E401
E402
E405
E406
• System error due to a fault
in the instrument. Contact
your local dealer.
• Calculation error in Wave-
and-Read measurement.
DL502-503.book 60 ページ ２０１０年４月５日 月曜日 午前９時４７分