Topcon DL-503 - Managing Recorded Data; Data Check, Edit, and Delete

58
Other Procedures
1/8: **-**-*/
*
16.3 Communication Parameters
You can select the communication parameters for
connecting a data collector or a computer.
The baud rate and parity settings can be selected from the
following.
• Baud rate: *1200 bps / 2400 bps / 4800 bps /
9600 bps / 19200 bps / 38400 bps
• Parity: *None / Odd / Even
16.4 Auto Power-Off
You can enable or disable the auto power-off function.
* On(30min): The instrument powers off automatically 30
minutes after the last key operation.
Off: The auto power-off function is disabled.
The fractional/decimal display format for distance values depends
on the settings only in measuring mode.
(See "3.2 Display".)
Note:
• Outputting start code and end code (CSV format)
Press to display the setting screen for outputting start and
end codes.
Yes: During data output, outputs start code (STX) and end
code (ETX).
* No: Outputs text data only.
Note:
DL502-503.book 58 ページ ２０１０年４月５日 月曜日 午前９時４７分