Topcon ES-52 - Page 138

20. MISSING LINE MEASUREMENT
130
PROCEDURE
1. Observe the starting position and
target.
 "20.1 Measuring the
Distance between 2 or more
Points"
2. After measuring the targets, press
[MOVE].
Press [YES].
•Press [NO] to cancel
measurement.
3. The last target measured is
changed to the new starting
position.
Perform missing line
measurement.
"20.1 Measuring the Distance
between 2 or more Points".
MLM
SD
HD
VD
20.757m
27.345m
1.012m
RECMOVE MEAS MLM
Move 1st meas ?
MLM
SD
ZA
HA-R
NO YES