11. DISTANCE MEASUREMENT
42
4. Press [HVDOUT-T] or [HVDOUT-
S] to measure the distance and
output the data to peripheral
equipment.
5. Press [STOP] to stop outputting
data and return to Obs Mode.
The following explains coordinate measurement and the features used to output
measurement data to a computer or peripheral equipment.
Interfaces: "34.2 Optional accessories"
Output format and command operations: "Communication manual"
PROCEDURE
1. Connect ES and host computer.
2. Allocate the [NEZOUT-T] or
[NEZOUT-S] softkey to the OBS
mode screen.
"31.3 Allocating Key
Functions"
• Pressing the softkey outputs
data in the following format.
[NEZOUT-T]: GTS format
[NEZOUT-S]: SET format
3. Sight the target point.
11.5 Coordinate Measurement and Outputting the
Data
To Next Page
Loading...
