Topcon ES-52 - Angle Measurement and Data Output

10. ANGLE MEASUREMENT
36
The following explains angle measurement and the features used to output
measurement data to a computer or peripheral equipment.
Interface cables: "34.2 Optional accessories"
Output format and command operations: "Communication manual"
PROCEDURE
1. Connect ES and host computer.
2. Allocate the [HVOUT-T] or
[HVOUT-S] softkey to the OBS
mode screen.
"31.3 Allocating Key
Functions"

• Pressing the softkey outputs
data in the following format.
[HVOUT-T] : GTS format
[HVOUT-S] : SET format
3. Sight the target point.
4. Press [HVOUT-T] or [HVOUT-S].
Output measurement data to
peripheral equipment.
10.3 Angle Measurement and Outputting the Data