EasyManua.ls Logo

Topcon ES-52 - Page 273

Topcon ES-52
284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
265
35. SPECIFICATIONS
*4: Figures when using Kodak Gray Card White side (reflection factor 90%)
and brightness level is less than 30000 lx (a little cloudy).
*5: Figures when using Kodak Gray Card Gray side (reflection factor 18%)
and brightness level is less than 30000 lx (a little cloudy).
*4,*5: When performing reflectorless measurement, the possible measurement
range and precision will change depending on the target reflection factor,
weather conditions and location conditions.
*6: Face the prism toward the instrument during the measurement with the
distance at 10 m or less.
*7: At the time of the tracking measurement.
Internal memory
Capacity 5,000 measurement points
Data transfer
Data input/output Asynchronous serial, RS232C compatible
Power Supply
Power source: Rechargeable Li-ion battery BDC46C
Working duration at 20 °C:
Distance and angle measurement
(Fine single measurement = every 30 sec.) :
BDC46C: about 15 hours
Battery state indicator: 4 levels
Auto power-off: 5 levels (5/10/15/30 min/Not set) (selectable)
Charging time at 25 °C: about 2.5 hours (using CDC68A)
*8
Battery (BDC46C)
Nominal voltage 7.2V
Capacity 2430mAh
Dimensions 38 (W) x 70 (D) x 20 (H) mm
Weight about 103g
Charger (CDC68A)
Input voltage: AC100 to 240V
Charging time per battery (at 25°C):
BDC46C: about 2.5 hours
(Charging can take longer than the times stated
above when temperatures are either especially
high or low.)
Charging temperature range:
0 to 40°C
Storage temperature range:
-20 to 65°C

Table of Contents

Related product manuals