36
SETTING
SET ITEMS
You can set "Chart settings" and "RGB settings" on the chart setting menu.
Chart settings
The items that can be changed by [Chart settings] are shown below. After setting is finished, touch the
[OK] button.
1. Exam distance
Set the test distance. You can set the distance in the range of 2.5m to 6.0m by 25cm.
2. Slideshow interval for picture
Set the interval for the slideshow of picture images. You can set the interval within 3 to 10 seconds
at intervals of 1 second.
3. Visual acuity display
You can change the size of the visual acuity that is displayed on the chart. Select "Disable", and the
visual acuity value is not displayed.
4. Layout for mask
You can select how the mask status should be displayed when applying the mask with the [mask]
switch.
Select "Center", and the chart can be indicated at the center of the liquid crystal display.
5. Mirror turning of chart
You can select whether the chart should be turned from right to left or vice versa. Use this item
when the chart is set by folding with a mirror. "Picture" and "Movie" are not turned.
6. Language
You can check the language which is set at present.
Touch the [Default] button among the function buttons. You can return the contents changed on
the chart setting screen to the setting when shipped.
To Next Page
Loading...
