6
CAUTION
To prevent the reliability of the measurement result from being lowered, set the
test distance of the instrument correctly.
40
Be careful not to damage the liquid crystal display or stain it with fingerprint,
dust or others. The reliability of the measurement result may be lowered.
14
This instrument has been tested (with 100V/230V) and found to comply with
IEC60601-1-2 Ed.3.0: 2007.
This instrument radiates radio frequency energy within standard and may
affect other devices in the vicinity.
If you have discovered that turning on/off the instrument affects other devices,
we recommend you change its position, keep a proper distance from other
devices, or plug it into a different outlet. Please consult the dealer from whom
you purchased the instrument if you have any additional questions.
----
To Next Page
Loading...
