5
CAUTION
Icons Prevention Item Page
To avoid electric shock, do not handle the plugs with wet fingers. 17
To avoid electric shock, do not touch the external connection terminal and the
patient at the same time.
12
Tighten the screws securely not to be loosened. If the screw is loosened, the
instrument may fall off to cause a trouble or injure someone.
14
When installing the instrument on a wall, use the wall-mounting metal fixture,
which is one of the components, and install it on the strong wall that can sup-
port its weight. (Do not install it on the plaster-board wall.) The instrument may
fall off to cause a trouble or injure someone.
15
Fix the wall-mounting metal fixture on the wall as taking care for its direction.
The instrument may fall off to cause a trouble or injure someone. If the instru-
ment is installed slantwise, the reliability of the measurement result may be
lowered.
15
When installing the instrument, keep the space of 5cm or more above and
under the instrument not to block the vents on its top and bottom surfaces.
The instrument may be heated to burn someone or cause a trouble.
14
When using the wall-mounting metal fixture, pass the clearance rings, which
are the accessories, through the wall-mounting screws to be installed on the
instrument body. In this condition, fix the screws securely. If not, the instru-
ment may fall off to cause a trouble or injure someone.
41
Do not put substances above the vent on the top surface of the instrument.
The instrument may be heated to burn someone or cause a trouble.
----
To Next Page
Loading...
