Topcon RL-100 2S User Manual

19
The channel on the RL-100 2S is not same as one on the RC-400 (Remote mode).
1 If the channel on the main unit is different from that on the remote control when the power
switch is turned ON, the channel on the main unit will be automatically searched for.
[SEARCHING...] will be displayed.
2 When the search is finished, the available channel and serial number of the instrument will be
displayed. If more than one channel is displayed, use the arrow key (up/down) to position the
cursor on the channel you want to select. Press the [ENT] key to select that channel.
If the message shown left appears, it may indicate that the
radio transmission fails. Please turn on the power for the
instrument and the remote controller once again.

Topcon RL-100 2S Specifications

General

Brand	Topcon
Model	RL-100 2S
Category	Laser Level
Language	English