24
Menu
How to Set the Menu
As indicated by arrows in the figure, there are 6 setting categories in the menu and selection and
changes of the settings are performed using the arrow keys and [ENT] key.
1 Press the menu key to display the menu screen. As
you can see, the mask setting is framed with the
curser.
2 Move the curser to the item you would like to set up
using the arrow keys and press the [ENT] key. The
selected item will start flashing.
3 Select the setting details using the arrow keys.
4 Press the [ENT] key to lock the setting.
When setting up using the remote controller, make
sure that “OK” is displayed on the transmission and
reception display. If “NG” is displayed, press the
[ENT] key once again.
5 In the same manner, select and change the next
setting.
Changing Masking Mode
Changing rotary head speed
Setting channel
Sensitivity Level (LEVEL)
Safety Lock System
(Height Alert)
Alarm Signal (COM)
To Next Page
Loading...
