Topcon RL-100 2S User Manual

20
Battery Status Display
Remaining battery level is displayed at the lower bar in the display area.
For handling batteries, see the “Maintaining Power Sources” on page 33.
If an AC/DC converter is connected to the
main instrument when the main
instrument is displaying “RL-100
BATTERY LOW”, the remaining battery
level display will not change.
Once the power is turned off, the battery
remaining display will reset.
Battery remaining display
Rotating laser display: RL
Remote controller display: RC
RL-100 BATTERY Low
or
RC-400 BATTERY Low
(Displayed on the RC-400 only)
Battery is sufficient.
Battery is sufficient.
Battery is sufficient.
The power is low, but laser is still usable. (Indication
continues until batteries are dead.)
Dead batteries of RL-100 2S or RC-400. Recharge
the battery or replace the dry batteries with new ones.

Topcon RL-100 2S Specifications

General

Brand	Topcon
Model	RL-100 2S
Category	Laser Level
Language	English