To Next Page

To Previous Page

28 Operation

For the LNB Setting, move the cursor to Installation item and

press

OK button. Then, move the cursor to the LNB Setting

item and press

OK button.

Satellite Name

Press

OK button to display the Satellite List. The list of Satel-

lite is put in alphabetical order. Select one of the preprogrammed

satellites that corresponds to the direction of the antenna. If

the desired satellite name is not in the list, then select Other.

LNB Frequency

Select the L.O. Frequency of the LNB. The LNB Frequency of

5150, 9750, 10600, 10750, 11250, 11475, 9750/10600, 9750/10700

or 9750/10750 can be selected by

V− or

V+ button. Also you

can insert LNB frequency by using Numeric key on the RCU.

LNB Power

Select LNB power On to output the LNB voltage.

22 kHz

If you are using a 22 kHz tone switch box, make 22 kHz tone

switch enable or disable to select LNB or antenna.

Note

If the LNB Frequency is set to Universal LNB

(9750/10600, 9750/10700 or 9750/10750), it is not

possible to set 22 kHz because high or low band is

selected by 22 kHz.

DiSEqC 1.1

The STB is designed to be DiSEqC 1.1 compatible. This allows

multiple antennas to be connected to the STB at the same time.

If you are using two or more ﬁxed antennas or LNBs, then it

is recommended to use a DiSEqC 1.1 switch.

All manuals and user guides at all-guides.com

Topfield TF5000CI User Manual

Questions and Answers: