FCM II Installation Guide: 20160419 - Part # 2307
EC Declaration Of Conformity (Valid until April 20, 2016)
The signatory, representing the manufacturer, declares that the products listed below are in conformity with the essential requirements of the
following EC Directive(s) when installed in accordance with the product installation instructions:
2004/22/EC The Measuring Instruments Directive (and its amending directives)
2004/108/EC The Electromagnetic Compatibility Directive (and its amending directives)
2006/95/EC The Low Voltage Directive (and its amending directives)
Product: Distributed I/O Control System
Model name/number: FCM II
NMi Certin B.V., Number 0122
Conformity has been demonstrated with reference to the following documentation:
(MID) EC type-examination certificate TC7311
Compliance with the Essential Health and Safety Requirements has been assessed by reference to the following standards:
WELMEC guide 8.8 General and Administrative Aspects of the Voluntary System of Modular Evaluation of Measuring
instruments under MID
OIML R117-1:2007(E) Dynamic measuring systems for liquids other than water
EN 61000-6-4: 2007 Generic emissions for industrial operating environments
EN 61000-6-2: 2005 Generic immunity for industrial operating environments
IEC 61010-1: 2004 Electrical Equipment for Measurement, Control, and Laboratory Use; Part 1: General Requirements
Year of CE Marking: 2007
Name: William J. Porthouse Position: Director of Engineering & Production Date: 31-Oct-2012
EC Declaration Of Conformity
The signatory, representing the manufacturer, declares that the products listed below are in conformity with the essential requirements of the
following EC Directive(s) when installed in accordance with the product installation instructions:
2014/32/EU The Measuring Instruments Directive (and its amending directives)
2014/30/EU The Electromagnetic Compatibility Directive (and its amending directives)
2014/35/EU The Low Voltage Directive (and its amending directives)
Product: Distributed I/O Control System
Model name/number: FCM II
NMi Certin B.V., Number 0122
Conformity has been demonstrated with reference to the following documentation:
(MID) EC type-examination certificate TC7311
Compliance with the Essential Health and Safety Requirements has been assessed by reference to the following standards:
WELMEC guide 8.8 General and Administrative Aspects of the Voluntary System of Modular Evaluation of Measuring
instruments under MID
OIML R117-1:2007(E) Dynamic measuring systems for liquids other than water
EN 61000-6-4: 2007 Generic emissions for industrial operating environments
EN 61000-6-2: 2005 Generic immunity for industrial operating environments
IEC 61010-1: 2004 Electrical Equipment for Measurement, Control, and Laboratory Use; Part 1: General Requirements
Year of CE Marking: 2007
Name: William J. Porthouse Position: Director of Engineering & Production Date: 19-April-2016