ELECTRICAL CONSIDERATIONS AND REGULATORY REQUIREMENTS
Equipment Operation. If the equipment is used in a manner not specified in this installation guide,
the protection provided by the equipment may be impaired..
This equipment is suitable for use in Class I, Division 2, Groups C and D hazardous locations OR
non-hazardous locations only.
WARNING: EXPLOSION HAZARD, Do not disconnect equipment unless power has been
removed or the area is known to be non-hazardous.
WARNING: EXPLOSION HAZARD, Substitution of components may impair suitability for use in
Class I, Division 2 environments.
WARNING: EXPLOSION HAZARD, The area must be known to be non-hazardous before
servicing/replacing the unit and before installing.
CAUTION: Use supply wires suitable for 5°C above surrounding ambient.
To Next Page
Loading...
