tornos DECO 13a - Page 11

QUICK REFERENCE − DECO 13A
en 300417 − 04/08 11
M/SGrp.FunctionCode
G90* Absolute dimension 2 M
G91 Incremental dimension 2 M
G94 Asynchronous feedrate [mm/min] 2 M
G95* Synchronous feedrate [mm/rev] 2 M
G100 Rapid traverse (unproductive) 2 S
G113 Loop End 1 S
G130 Start of threading specification 8 S
G131 End of threading specification 8 S
G190* Exact stop (between segments) 2 M
G191 Continuous contouring
(if angle = 0)
2 M
G250 Cancel polygoning 4 S
G251 Spindle ON (specified by hundreds) for polygo-
ning
4 M
G314 Path > π for G02/G03 function 2 S
G350 Cancel polygoning 4 S
G351 Spindle ON (specified by hundreds) for polygo-
ning
4 M