tornos DECO 13a - Page 21

QUICK REFERENCE − DECO 13A
en 300417 − 04/08 21
M/SRes
p.
NoteFunctionCode
M404 S4 spindle rotating ON (ccw) (DO1703 if 4
spindles) Dis-
regards
Param. W.
no S
M405 S4 spindle OFF (DO1703 if 4
spindles) Dis-
regards
Param. W.
no M
M418 S4 spindle synchro phase Disregards
Param. W.
no M
M419 S4 spindle positioning Disregards
Param. W.
no M
M498 Switch S4 spindle to rotary axis Disregards
Param. W.
no M
M499 Reset S4 spindle ON. Cancel M498 Disregards
Param. W.
no M
M503 S5 spindle rotating ON (cw) (DO1704) &
(DO1710−DO
1724)
Disregards
Param. W.
no S
M504 S5 spindle rotating ON (ccw) (DO1704 if 4
spindles) Dis-
regards
Param. W.
no S
M505 S5 spindle OFF (DO1704) &
(DO1710−DO
1724)
Disregards
Param. W.
no M
M603 S6 spindle rotating ON (cw)