g020650
Figure 22
1. Indicator light 3. Middle button
2. Right button
4. Left button
• Left Button, Menu Access/Back Button—Press this
button to access the InfoCenter menus. Y ou can
use it to back out of any menu you are currently
using.
• Middle Button—Use this button to scroll down
menus.
• Right Button—Use this button to open a menu
where a right arrow indicates additional content, or
to select an option.
Note: The purpose of each button may change
depending on what is required at the time. Each
button will be labeled with an icon displaying its
current function.
InfoCenter Icon Description
SER VICE DUE
Indicates when scheduled service
should be performed
Hour meter
Info icon
Function-control switch is in the
T RANSPORT position.
Function-control switch is in the M OW
position.
Indicates when the cutting units are
being raised.
Indicates when the cutting units are
being lowered.
Operator must sit in seat
InfoCenter Icon Description (cont'd.)
Parking-brake indicator—indicates
when the parking brake is engaged
Function-control switch is in the
N EUTRAL position.
PT O is engaged
Stop or shutdown
Key switch
PIN code
CAN bus
InfoCenter
Switch
Operator must release switch
Operator should change to indicated
state
T raction motor
Return to previous screen
Item not selected/active
Item selected/active
Reel
Electric-parking-brake
indicator—indicates when the
electric parking brake is engaged
Symbols are often combined to form sentences. Some
examples are shown below:
Operator should put the machine in
neutral
Sit down or engage the parking brake
20
To Next Page
Loading...
