Toro 34225 - Controls System Maintenance; Adjusting Spreader Pattern Control

6.Iftheuidlevelistoolow,addthespecieduid
intotheexpansiontank.
7.Installthetankcapontotheexpansiontankand
tightenthecapuntilitissnug(Figure86).
Note:Donotovertightenthecap.
ControlsSystem
Maintenance
AdjustingthePattern
ControlCableforthe
Spreader
1.Preparethemachineformaintenance;referto
PreparingtheMachine(page51).
2.Emptythehopper;refertoEmptyingthe
Spreader(page27)
3.Closetheimpellergatebypushingthe
wide-distributionimpeller-gateleverforwardfully
(Figure87).
g027470
Figure87
1.Unlock—spreadpattern
controlhandle(rotate
counterclockwise)
3.Lock—spreadpattern
controlhandle(rotate
clockwise)
2.Pushdown—spread
patterncontrolhandle
4.Push
forward—wide-distribution
impeller-gatelever
4.Rotatethespread-pattern-controlhandle
counterclockwise,pushthehandledown,
androtatethespread-pattern-controlhandle
clockwise(3)refertoFigure87.
5.Loosenthejamnutattheendofthe
pattern-controlcable(Figure88).
64