Toro 34230 - Page 45

g027391
Figure52
1.Sprayer-tankcap
4.Drainvalve
2.Fillerneck5.Valvehandle
3.Plug
3.Determinetheamountofwaterneededtomix
theamountofchemicalneededasspeciedby
thechemicalmanufacturer.
4.Openthetankcaponthespraytank(Figure52).
5.Add3/4oftherequiredwatertothesprayertank
throughthellerneck.
Important:Alwaysusefresh,cleanwater
inthespraytank.Donotpourchemical
concentrateintoanemptytank.
6.Rotatethepump-shutoffvalveclockwisetothe
OPENposition(Figure53).
g027392
Figure53
1.Strainer(sprayertank)2.Pump-shutoffvalve
7.Starttheengineandsetthethrottlemidway
betweentheSLOWandFASTpositions.
8.Setthesprayer-pumpswitchtotheONposition
(Figure54).
g305521
Figure54
1.Agitation-bypasslever4.Hourmeterandspray
pressuredisplay
2.Narrow-spraypatternlever
5.Sprayer-pumpswitch
3.Wide-spraypatternlever
9.MovethethrottletotheFASTposition.
10.Pullthetank-agitationlevertotheONposition.
Note:Thewaterinthetankwillcirculate.
11.Addthespeciedamountofchemical
concentratetothetankasdirectedbythe
chemicalmanufacturer.
Important:Ifyouareusinga
wettable-powderchemical,mixthe
powderwithasmallamountofwatertoform
aliquidslurrybeforeaddingthechemical
mixturetothetank.
12.Addremainingwatertothetankandinstallcap
ontothellerneckofthetank.
Note:Allowthecontentofthesprayertankto
mixthoroughly.
EmptyingtheSprayerTank
Operatorsuppliedequipment:
•Adrainhosewitha1/2–14inchNPTmalecoupling
•Adraincontainer(capacityvarieswithremaining
sprayertankcontent)
•PTFEthreadsealant
1.Movethemachinetoalevelsurfaceatthe
designatedareaforemptyingandcleaningthe
sprayertank,movemotion-controllevertothe
NEUTRALposition,shutofftheengine,waitforall
45