CHASSIS
3-23Toro Z Master G3 3000/5000/6000 Series Service Manual
3
10. Remove the clevis pin from the cable yoke (Fig.
083).
Fig. 083 PICT-9001a
11. Release the brake cable retainer holding the brake
cable to the frame (Fig. 084).
Fig. 084 PICT-9008a
Fig. 085 PICT-9014a
13. Pull the cable out over the frame cross bar and
remove it from the unit (Fig. 086).
Fig. 086 PICT-9017a
12. Slide the cable out of the slot (Fig. 085).
To Next Page
Loading...
