Toro 74954 - Page 47

CHASSIS
3-26 Toro Z Master G3 3000/5000/6000 Series Service Manual
3
9. Slide the rubber boot over the snap tting (Fig. 095).
Fig. 095 PICT-9077a
10. Install a tie strap securing the brake cable to the
cradle (Fig. 096).
Fig. 096 PICT-9070a
12. Adjust the park brake. Refer to “Adjusting the
Parking Brake” on page 3-32.
A. Standard nut B. Lock nut
11. Install a standard nut and a lock nut onto the
threaded brake cable rod (Fig. 097).
Fig. 097 PICT-9075a
A B