Toro 74954 - Page 81

CHASSIS
3-60 Toro Z Master G3 3000/5000/6000 Series Service Manual
3
9. Secure the LH control assembly to the frame with a
bolt and the pivot tube (Fig. 212).
Fig. 212 DSCN-4473a
10. Install the plug connector to the neutral switch (Fig.
213).
Fig. 213 DSCN-4500a
11. Install the wiring harness in the wire anchor located
on the LH motion control assembly (Fig. 214).
Fig. 214 DSCN-4502a
12. Install the lock nut from the damper motion control to
the LH motion control assembly (Fig. 215).
Fig. 215 DSCN-4462a