ENGINE
4-10 Toro Z Master G3 3000/5000/6000 Series Service Manual
4
Fig. 255 DSCN-4259a
19. Install the z-bend of the throttle cable into the middle
hole in the throttle arm assembly (Fig. 256).
Fig. 256 DSCN-4261
18. Slide the throttle cable through the hose clamp
located next to the engine (Fig. 255).
16. Route the fuel line and the throttle cable through
the hose clamp located on the right hand side of the
frame next to the battery box (Fig. 253).
Fig. 253 DSCN-0063a
17. Install the fuel line and fuel clamp on the fuel lter
(Fig. 254).
Fig. 254 DSCN-0013a
To Next Page
Loading...
