HYDRAULIC SYSTEM
4-22 Z580/Z593/Z595 Diesel Service Manual
4
5. Install the wheel motor fi ttings. Note the location
markings (Fig. 315).
7. Slide the brake band assembly over the wheel motor
hub. Install the 3 spacers, the retainer and 3 brake
band bolts into brake bracket (Fig. 317).
Fig 315 PICT-3367
Fig 317 PICT-3358
8. Make sure the parking brake is released.
9. Make sure the woodruff key is in place in the motor
shaft. Clean the shaft and wheel hub bore with
solvent to remove any trace of grease or oil. Slide
the wheel hub onto the wheel motor shaft and into
the brake band (Fig. 318).
6. Install the wheel motor hoses onto the wheel motor
fi ttings. Note the location markings (Fig. 316).
Fig 318 PICT-3384
Fig 316 PICT-3366a
To Next Page
Loading...
