g031026
Figure 18
1. Platform up
3. Pull the knob out to release
the platform.
2. Platform down
Driving Forward or
Backward
The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place
the throttle control in the F AST position for best
performance.
Important: Back the machine over curbs, 1 wheel
at a time; driving it forward over curbs could
damage the machine.
CAUTION
The machine can spin very rapidly , and you
may lose control of the machine, causing
personal injury to you and damage to the
machine.
Slow down the machine before making sharp
turns.
Driving Forward
1. Disengage the parking brake; refer to Operating
the Parking Brake ( page 15 ) .
2. Move the motion-control levers to the center ,
unlocked position.
g030983
Figure 19
1. Front reference bar
4. Right control lever
2. Left control lever
5. Right control lever in the
N EUTRAL - LOCK position
3. Rear reference bar 6. Left control lever in the
N EUTRAL - LOCK position
3. Slowly push the motion-control levers forward
( Figure 20 ).
Note: The engine shuts of f if you move a
motion-control lever while the parking brake is
engaged.
Note: The farther you move the motion-control
levers in either direction, the faster the machine
moves in that direction.
Note: T o stop, pull the motion-control levers
back to the N EUTRAL position.
19
To Next Page
Loading...
