Decal 1 12-3858 is for machines with 60in decks only .
decal1 12-3858
1 12-3858
1. Read the Operator's
Manual .
3. Remove the key before
adjusting the height of cut.
2. Read the Operator's
Manual before performing
maintenance.
4. Height-of-cut settings
decal1 16-8283
1 16-8283
1. W arning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 75 to 81 N∙m (55 to 60 ft-lb).
decal1 16-8775
1 16-8775
1. Read the Operator ’ s
Manual.
2. W arning—ll to the bottom
of the ller neck; do not
overll the tank.
decal138-1 147
138-1 147
1. Read the Operator ’ s
Manual .
3. Bagging setting
2. Short, light grass
4. T all, dense grass
decal131-3507
131-3507
1. Read the Operator's
Manual .
2. Belt tensioner
5
To Next Page
Loading...
