Toro Greensmaster 3150 04358 - Service Interval Chart; Premaintenance Procedures; Removing the Seat Assembly; Jacking the Machine

ServiceIntervalChart
Figure34
Premaintenance
Procedures
RemovingtheSeatAssembly
Youmayremovetheseatassemblytoaccessthevalveblock
areaofthemachine.
1.Unlatchandraisetheseat,securingitwiththeproprod.
2.Disconnectthe2wire-harnessconnectorsunderthe
seat.
3.Lowertheseatandremovetherollpinsecuringthe
seat-pivotrodtotheframe(Figure35).
Figure35
1.Rollpin
2.Seat-pivotrod
4.Slidetheseat-pivotrodtotheleftside,slidetheseat
forward,andlifttheseatout.
5.Reversetheproceduretoinstalltheseat.
Note:Ifyouremovetheseatassemblyfrequently,youcan
replacetherollpinwithanR-keypin(PartNo.3290-467).
JackingtheMachine
CAUTION
Ifthemachineisnotproperlysupported,itcould
fall,crushingyouorothers.
Beforeservicing,supportthemachinewithjack
standsorblocksofwood.
Beforejackingthemachine,lowerthecuttingunits.The
jackingpointsareasfollows:
•Rightside—underthejackpadandadjacenttothe
ROPS-supportbracket(Figure36)
•Leftside—underthestep
•Rear—atthecasterfork
Figure36
1.Jackpad
32