Toro groundsmaster 455-D - Machine Controls Overview; Cutting Unit Engagement and Lift Controls

_____________
_____ _____ _____ _____ _____ _____ _____
GROUNDSMASTER® 455-D Daily Maintenance Check List
Unit Designation:__________
Daily Maintenance:(duplicate this page for routine use) TORO ID#:_______-_______
Maintenance Check Item
Daily Maintenance Check For Week Of
MON
HRS
TUES
HRS
WED
HRS
THURS
HRS
FRI
HRS
SAT
HRS
SUN
HRS
Safety Interlock Operation
Brake Operation
Engine Oil Level
Fuel Level
Cooling System Fluid Level
Drain Water/Fuel Separator
Optional Air Filter Precleaner
Radiator & Screen for Debris
1
Unusual Engine Noises
2
Unusual Operating Noises
Hydraulic System Oil Level
Hydraulic Hoses for Damage
Fluid Leaks
Tire Pressure
Instrument Operation
Cutting Unit Safety Doors
Height-of-Cut Adjustment
Clean Deck Belt area
1
Condition of Blades
Lubricate All Grease Fittings
3
Touch-up damaged paint
1
= Use only low pressure compressed air for debris removal.Do not use water.
2
= Check Glow Plugs and Injector Nozzles, if hard starting, excess smoke, or rough running is noted.
3
= Immediately after every washing, regardless of the interval listed.
Notation for areas of concern: Inspection performed by:________________
Item Date Information
1
2
3
4
5
6
7
(See Operator's and Service Manual for specifications and procedures)