Toro Groundsmaster 7210 - Setup; Initial Component Installation

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
Tire
1
1
Lug nut 5
Install the left rear tire (model
30360TC and 30363TC only).
2
No parts required
–
Activate and charge the battery
(model 30360TC and 30363TC
only).
3
No parts required
–
Adjust the ROPS.
4
No parts required
–
Check the tire pressure.
5
No parts required
–
Install weights.
6
No parts required
–
Check the hydraulic uid, engine
oil, and coolant levels.
Operator’s Manual
1
Engine Operator’s Manual
1
Parts Catalog
1
Operator Training DVD
1
Pre-delivery Inspection Sheet
1
Engine warranty
1
CE certicate
1
7
Certicate of Quality
1
Read the manuals and watch the
DVD before operating the machine.
Use the remaining parts for the
installation of attachments.
Step
1
Installing the Left Rear
Tire (Model 30360TC and
30363TC Only)
Parts needed for this step:
1
Tire
5 Lug nut
Procedure
1. Suppor t the left rear of the mac hine with jac k
stands .
2. R emo v e the lug n uts from the tire mounting
studs .
3. Pull the crate and brac k et off of the wheel hub .
4. Install the rear tire onto the hub and secure it
using the lug n uts remo v ed previously .
5. T or que the lug n uts to 75 to 80 ft-lb (102 to
108 N ⋅ m).
16