Maintenance
Note: Deter mine the left and right sides of the mac hine from the nor mal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the rst 10
operating hours
• Check the alternator belt tension.
• Torque the frame mounting bolts.
• Torque wheel lug nuts.
After the rst 50
operating hours
• Change the mower deck gear box lubricant
• Change the engine oil and lter.
After the rst 200
operating hours
• Change the hydraulic oil and lter.
Before each use or daily
• Test the safety system.
• Check the engine oil level.
• Check the engine coolant level.
• Clean the radiator with compressed air (do not use water)
• Check the hydraulic uid level.
• Check the mower blades.
• Clean the mower deck.
Every 50 hours
• Grease the bearing and bushing grease ttings.
• Check battery cable connections.
• Check the tire pressure.
• Check the condition of the blade drive belts on the mower deck.
Every 150 hours
• Check the lubricant in the mower deck gear box.
• Change the engine oil and lter.
Every 200 hours
• Inspect cooling system hoses and seals. Replace them if cracked or torn.
• Check the alternator belt tension.
• Torque wheel lug nuts.
Every 400 hours
• Change the mower deck gear box lubricant
• Service the air cleaner.
• Replace the fuel lter canister.
• Replace the fuel pre-lter.
• Check the fuel lines and connections.
Every 800 hours
• Change the hydraulic oil and lter.
• Inspect engine valve clearance. Refer to your Engine Operator’s Manual.
Every 1,500 hours
• Replace moving hoses
Every 2 years
• Drain and clean the fuel tank.
• Flush and replace cooling system uid.
• Replace safety switches.
Important: R efer to y our Engine Operator’ s Man ual f or additional maintenance pr ocedur es.
A detailed Ser vice Man ual is also a v aila ble f or purchase fr om y our Authoriz ed T or o Distributor .
41
To Next Page
Loading...
