Warning
CALIFORNIA
Pr oposition 65 W ar ning
Batter y posts, ter minals, and r elated
accessories contain lead and lead
compounds, chemicals kno wn to the
State of Calif or nia to cause cancer and
r epr oducti v e har m. W ash hands after
handling .
Batter y ter minals or metal tools could
shor t a gainst metal tractor components
causing spar ks. Spar ks can cause the
batter y gasses to explode, r esulting in
per sonal injur y .
• W hen r emo ving or installing the
batter y , do not allo w the batter y
ter minals to touch an y metal par ts of
the tractor .
• Do not allo w metal tools to shor t
betw een the batter y ter minals and
metal par ts of the tractor .
7. Install the batter y into the mac hine and secure
it.
Important: T he batter y must not be a ble
to mo v e or wig g le when pushed.
8. First, install the positi v e cable (red) to the
positi v e (+) ter minal and then the neg ati v e
cable (blac k) to the neg ati v e (-) ter minal of
the batter y . Slide the r ubber boot o v er the
positi v e ter minal to prev ent a possible shor t
from occur ring .
Incor r ect batter y ca ble r outing could
dama ge the machine and ca bles causing
spar ks. Spar ks can cause the batter y
gasses to explode, r esulting in per sonal
injur y .
• Al w ays disconnect the negati v e
(black) batter y ca ble bef or e
disconnecting the positi v e (r ed)
ca ble.
• Al w ays connect the positi v e (r ed)
batter y ca ble bef or e connecting the
negati v e (black) ca ble.
Connecting ca bles to the wr ong post
could dama ge the electrical system and
r esult in per sonal injur y .
Note: Ensure that the batter y cables are
routed a w a y from any shar p edg es or mo ving
par ts .
Step
3
Adjusting the ROPS
No Parts Required
Procedure
1. R emo v e the hair pin cotter pins and remo v e the
tw o pins from the roll bar ( Figure 5 ).
18
To Next Page
Loading...
