REELMASTER® 216-D Maintenance Schedule
Minimum Recommended Maintenance Intervals:
Maintenance Procedure Maintenance Interval & Service
Every
Every
Every
Inspect Air Filter, Dust Cup, and Baffle Every
400hrs
200hrs
100hrs
Lubricate All Grease Fittings
50hrs
† Change Engine Oil A Level
Service
† Check Fan and Alternator Belt Tension
† Change Engine Oil Filter
B Level
† Check Traction Belt Tension
Service
Service Air Filter
Replace Fuel Filter/Water Separator
† Replace Hydraulic Filter
C Level
† Torque Wheel Lug Nuts
Service
Replace Hydraulic Fluid
Check Battery Level/Connections
Inspect Traction Linkage Movement
‡ Torque Head Bolts and Adjust Valves D Level
‡ Check Engine RPM (idle and full throttle)
Service
† Initial break in at 10 hours
‡ Initial break in at 50 hours
Replace Moving Hoses
Replace Safety Switches
Annual Recommendations:
Items listed are recommended every
Cooling System - Flush / Replace Fluid
1000 hours or 2 years whichever occurs
Replace Thermostat
first.
Fuel Tank - Drain/Flush
Hydraulic Tank - Drain/Flush
(See Operator's and Service Manual for specifications and procedures)
To Next Page
Loading...
