Toro V - Page 66

11.
Remove the 7/16-20 blade bolt that secures
the blade, blade retainer and accelerator to
the engine shaft. Use heavy duty gloves to
hold the blade while removing the nut. Set
the parts aside
12.
Tools Required
Compression Pliers (p/n
303857)
Wrist Pin Knockout Tool (602884)
TOW E-12
Flat blade screwdriver
with a TOW
E-12 socket and separate the
halves using a screwdriver.
1. Remove the four crankcase cap screws
9-10
Service Section