Toro Z Master Z400 Series - Page 109

5-22 Z Master Z400 Service Manual
5
18. Reconnecting the choke cable:
a. Push the choke knob into the full down position
(Fig. 288).
ENGINE
Fig 288 PICT-0296
b. Reconnect the z-bend of the choke cable to the
choke linkage. The choke linkage should be in
the full open position (right). Tighten the cable
clamp (Fig. 289).
Fig 289 PICT-0297
Fig 291 PICT-0272
20. Install the hydraulic oil tank to the guard strap and
fuel tank support using the two sets of fasteners
(Fig. 291).
Fig 290 PICT-0273
19. Installthelefthandguardstrapandmuferguardto
the frame using the two sets of fasteners (Fig. 290).