5-30 Z Master Z400 Service Manual
5
ENGINE
8. Install the center bolt and two spring washers that
hold the electric PTO clutch to the engine crankshaft
(Fig. 320).
Fig 320 PICT-0014c
Fig 322 PICT-0100a
10. Plug the clutch pigtail harness into the main harness
(Fig. 322).
Fig 321 PICT-0027c
9. Torque the center bolt to 55 ft-lbs. (Fig. 321).7. Apply a thread locking compound to the clutch
retainer bolt (Fig. 319).
Fig 319 PICT-0026c
To Next Page
Loading...