3-2 Z Master Z400 Service Manual
3
CHASSIS
Caster Fork Assembly Removal
Estate Series with bushing front casters
1. Raise the front of the unit off the ground, allowing
enough clearance to remove the caster fork from the
bottom hub.
2. With a hammer and chisel, remove the top grease
cap (Fig. 032).
Fig 032 PICT-0001 rev
Fig 034 PICT-0003
4. Remove the caster fork assembly from the front
frame (Fig. 034).
Fig 033 PICT-0002
3. Remove the E-ring (Fig. 033).
Fig 035 PICT-0004
5. Remove the spacer (Fig. 035).
To Next Page
Loading...