Toro Z Master Z400 Series - Page 40

3-9Z Master Z400 Service Manual
3
CHASSIS
3. Remove the wheel from the fork (Fig. 060).
4. Remove the spacer nut from one side of the wheel
(Fig. 061).
5. Remove the caster axle and second spacer nut from
the wheel (Fig. 062).
Fig 060 PICT-0014
Fig 061 PICT-0015 rev
Fig 062 PICT-0016 rev
2. Remove the wheel bolt and nut from the fork (Fig.
059).
Fig 059 PICT-0013