3-10 Z Master Z400 Service Manual
3
Fig 065 PICT-0020 rev
7. Fill the center of the wheel cavity with grease and
work the grease into the race (Fig. 065).
Fig 064 PICT-0018 rev
Caster Fork Wheel and Tire Assembly (Fig. 064)
8. Pack the wheel bearing prior to installation (Fig.
066).
Fig 066 PICT-0019 rev
CHASSIS
6. Remove both caster seals from the wheel (Fig. 063).
Fig 063 PICT-0017
A B C C B A
H
E E
D
F G
A. Seal Guard E. Spacer Nuts
B. Caster Seal F. Axle Bolt
C. Taper Cone Bearing G. Axle Bolt Nut
D. Caster Axle H. Wheel & Tire Assembly
To Next Page
Loading...