128
model 2000 DeviceNet Module Manual (DN611/DN611A)
Chapter 6 RAS Information (Except for RAS Area in Communication Memory)
6
(2) 7-Segment LED display status (02F3H to 0312H: 32 words)
The 02F3H to 0312H in the acknowledgement area represent 7-segment LED status
indications. They include DN611 status, network status, and slave device status
under DN611 management, and correspond to the error code indications on the
DN611 front panel. (Some of the statuses in Table 6-2 and Table 6-3 are not
displayed.). "NA = [ ]" in Table 6-8 shows a node address.
Table 6-7 Module Status Codes
Module Status Code Description
0 (00H) Normal status
1 (01H) Transmission not enabled
2 (02H) No data flow in the transmission line
3 (03H) Communication error
4 (04H) Scan list disagrees with the actual slave composition.
5 (05H) Network error
6 (06H) Network power error detected.
9 (09H) Busoff detected.
10 (0AH) Duplicate node address detected.
Table 6-8 7-Segment LED Status Indications
F 8 7 0 F 8 7 0
02F3H NA=1 NA=0 0303H NA=33 NA=32
02F4H NA=3 NA=2 0304H NA=35 NA=34
02F5H NA=5 NA=4 0305H NA=37 NA=36
02F6H NA=7 NA=6 0306H NA=39 NA=38
02F7H NA=9 NA=8 0307H NA=41 NA=40
02F8H NA=11 NA=10 0308H NA=43 NA=42
02F9H NA=13 NA=12 0309H NA=45 NA=44
02FAH NA=15 NA=14 030AH NA=47 NA=46
02FBH NA=17 NA=16 030BH NA=49 NA=48
02FCH NA=19 NA=18 030CH NA=51 NA=50
02FDH NA=21 NA=20 030DH NA=53 NA=52
02FEH NA=23 NA=22 030EH NA=55 NA=54
02FFH NA=25 NA=24 030FH NA=57 NA=56
0300H NA=27 NA=26 0310H NA=59 NA=58
0301H NA=29 NA=28 0311H NA=61 NA=60
0302H NA=31 NA=30 0312H NA=63 NA=62
To Next Page
Loading...
