How to resolve FORMAT ERROR on Toshiba B-EP2DL Printer?
If your Toshiba printer displays a 'FORMAT ERROR', it means a flash memory format error occurred. Turn the printer off and then back on. Send data from the host to the printer again. If the problem continues, please turn off the power and contact TOSHIBA TEC service representative.
How to resolve FLASH WRITE ERR on Toshiba Printer?
If your Toshiba printer shows a 'FLASH WRITE ERR.' message, it indicates that a flash memory write error occurred. Turn the printer off and then back on. Send data from the host to the printer again. If the problem continues, please turn off the power and contact TOSHIBA TEC service representative.
What does EXCESS HEAD TEMP mean on Toshiba Printer?
If your Toshiba printer displays 'EXCESS HEAD TEMP', it means the print head temperature has reached the upper limit of the operating temperature. Stop printing and wait until the printer automatically restores. If the problem continues, please turn off the power and contact TOSHIBA TEC service representative.
What does AMBIENT TEMP ERR mean on Toshiba B-EP2DL?
The 'AMBIENT TEMP ERR' message on your Toshiba printer indicates that the ambient temperature has reached the upper limit of the operating temperature. Stop printing until the ambient temperature falls within the printer’s operating temperature range.
What to do if my Toshiba B-EP2DL says FLASH MEM FULL?
If your Toshiba printer displays 'FLASH MEM FULL', it means the flash memory has insufficient area for storing data. Turn the printer off and then back on. Send data from the host to the printer again. If the problem continues, please turn off the power and contact TOSHIBA TEC service representative.
What causes a Toshiba B-EP2DL to not print with a blinking green or orange status light?
If your Toshiba Printer is not printing media and the status indicator is blinking green or orange, it is possible that a communication error has occurred. To resolve this, check that the interface cable is firmly connected and verify the communication parameters.
How to fix a Toshiba B-EP2DL that does not turn on?
If your Toshiba printer doesn't turn on when you press the power switch, it might be because the battery pack is not loaded correctly. Make sure to load a fully charged battery pack correctly.
Why does my Toshiba B-EP2DL say COVER OPEN?
The 'COVER OPEN' error on your Toshiba printer indicates that the top cover is open. Simply close the top cover to resolve this issue.
How to fix LOW BATTERY error on Toshiba B-EP2DL?
If your Toshiba printer displays a 'LOW BATTERY' error, it means the remaining battery capacity is low. Turn off the printer and replace the battery pack with a fully charged one.
What to do if my Toshiba B-EP2DL Printer says NO PAPER?
If your Toshiba Printer indicates 'NO PAPER,' it means the printer has run out of media. To resolve this, load a new media roll and press the [PAUSE] button.
General| Product Series | B-EP2DL Series |
|---|---|
| Manufacturer | Toshiba |
| Category | Printer |
| Print Technology | Direct Thermal |
| Print Resolution | 203 dpi |
| Media Type | Label |
| Memory | 16 MB Flash |
| Interface | USB |
| Supported Operating Systems | Windows |
Product compliance with EU EMC and R&TTE Directives.
Equipment compliance with FCC Part 15 limits for Class B digital devices.
General, country-specific, and safety precautions for wireless device handling.
Procedures for cleaning the print head, peel-off roller, and platen.
Common error messages and their corresponding troubleshooting steps.
Resolving issues with printer not turning on, battery, and communication problems.
Troubleshooting light printouts and data reception failures.
To Next Page
