Toshiba B-EP2DL Series

Other manuals for Toshiba B-EP2DL Series

System Mode Manual163 pages

Maintenance Manual30 pages

Option Installation Manual24 pages

Questions and Answers

A
Andre FloresSep 3, 2025
What to do if my Toshiba B-EP2DL says PAPER JAM?
- J
  Jennifer GrantSep 3, 2025
  If your Toshiba Printer displays a 'PAPER JAM' error, it could be due to several reasons: * The media is not loaded properly. Ensure you load the media correctly. * The media is jammed in the printer. Remove the jammed media, reload the media properly, and then press the [PAUSE] button. * The media is not fed properly. Reload the media correctly and press the [PAUSE] button. * The reflective sensor isn't detecting black marks. Make sure to load the media properly. * The transmissive sensor isn't detecting gaps between labels. Load the media properly. If the problem continues, set a threshold again.
V
Vanessa Harris DVMSep 2, 2025
What to do if the [FEED] button on my Toshiba B-EP2DL Printer isn't working?
- M
  Monica CookeSep 2, 2025
  If the [FEED] button on your Toshiba Printer is not functioning, it may be because the button is not being pressed completely. Try pressing the [FEED] button more firmly.
T
timothy50Sep 1, 2025
What to do if the power switch on my Toshiba B-EP2DL is not working?
- L
  Lauren RobertsSep 1, 2025
  If the power switch on your Toshiba Printer is not working, it could be due to a power switch failure or a CPU PC board assembly failure. You may need to replace either the power switch or the CPU PC board assembly.
J
John HancockAug 31, 2025
What causes a print error in the feed direction on a Toshiba Printer?
- K
  Karen CardenasAug 31, 2025
  If a print error occurs in the feed direction on your Toshiba Printer, it could be due to: * Failure in the motor idler gear, platen idler gear, idler gear, or platen gear. Replace the affected gear. * Print head failure. Replace the print head assembly. * Platen failure. Replace the platen.
P
Peter BrownAug 30, 2025
What causes a cover open error on a Toshiba Printer after closing the media cover?
- S
  Shannon PhillipsAug 30, 2025
  If you are getting a cover open error on your Toshiba Printer after closing the media cover, it might be because one side of the media cover is not locked. Ensure that you close the media cover until both sides click into position. Another possibility is a failure of the media cover switch, which would require replacing the media cover switch.
M
Michael Maynard VAug 29, 2025
Why is the print start position not being detected on my Toshiba B-EP2DL Printer?
- L
  Lance DavisAug 29, 2025
  If your Toshiba Printer is not detecting the print start position, it could be due to the following reasons: * The sensor is not adjusted properly. Re-adjust the sensor. * The sensor is not installed properly. Re-install the sensor. * The sensor or the sensor filter is dirty. Clean the sensor and sensor filter. * The sensor is disconnected from the CPU PC board assembly. Connect the sensor to the CPU PC board assembly completely.
C
Caitlin MedinaAug 28, 2025
Why is the print tone uneven on my Toshiba B-EP2DL Printer?
- E
  Elizabeth BauerAug 28, 2025
  If the print tone on your Toshiba Printer is uneven, it could be due to a dirty print head. Try cleaning it. Alternatively, the print head or the platen might be failing, requiring you to replace the print head assembly or the platen.
B
bdavenportAug 27, 2025
How to improve print quality on a Toshiba B-EP2DL Printer?
- J
  josephthomasAug 27, 2025
  If you are experiencing poor print quality with your Toshiba Printer, it could be due to a dirty print head. Clean the print head. Another possible cause is using unspecified media. Try changing the media to the specified type.
L
logan93Aug 27, 2025
Why won't my Toshiba B-EP2DL print labels one by one in strip mode or the specified number in batch mode?
- N
  Natasha StewartAug 27, 2025
  If your Toshiba Printer is not printing labels correctly in strip or batch mode, it may be due to sensor issues: * The sensors may not be adjusted properly; re-adjust them. * The sensors may not be installed correctly; re-install them. * The sensors may be dirty; clean them. * The sensors may be disconnected from the CPU PC board assembly; connect them.
S
Stephen ColeAug 25, 2025
What does it mean when the status light on my Toshiba B-EP2DL is orange and it's not printing?
- J
  john13Aug 26, 2025
  If your Toshiba Printer is not printing media and the status indicator light is orange, it means the battery is nearly depleted. Replace the battery with a fully charged one as soon as possible.

Toshiba B-EP2DL Series Specifications

General

Product Series	B-EP2DL Series
Manufacturer	Toshiba
Category	Printer
Print Technology	Direct Thermal
Print Resolution	203 dpi
Media Type	Label
Memory	16 MB Flash
Interface	USB
Supported Operating Systems	Windows