5. SYSTEM MODE EO18-33027
5.5 PRINTER PARAMETER FINE ADJUSTMENT
5-47
fine adjustment values are ±10. The max. value for each print speed is as below. When the
value exceeds the maximum, it is automatically corrected to the max. value.
B-EX4T1-G B-EX4T1-T
Speed Direct thermal Thermal transfer Direct thermal Thermal transfer
3ips +10step +10step +10step +10step
5ips +10step +10step
6ips +10step +10step
8ips +10step +10step +10step +10step
10ips +10step +10step +10step +10step
12ips +10step +10step +10step +10step
14ips +10step +10step +10step +10step
To Next Page
Loading...
