6. ON LINE MODE EO18-33027
6.3 HELP DISPLAY
6- 12
0 meter ribbon and the diameter is 43 mm for 70 meter ribbon.
(*5) The configuration of model name is below.
B-EX
4 T 1 - T
Head resolution G: 203dpi, T: 305dpi, H: 600dpi
Type 1: Type1, 2: Type2
Print method T: Thermal transfer/Direct thermal
Print width 4: 4” width, 6: 6” width
Series model
(*6)) The ribbon near end message may be displayed in this line. The condition of display is same as *4.
2. ICON
Five kinds of icon are displayed in the lowest line of online mode display.
These icons are displayed in only online mode display.
Icon Explanation
z It is used when wireless LAN module is mounted. It is not displayed
when wireless LAN module is not mounted.
z Graph shows the strength of radio wave.
Graph 0: Out of range
Graph 1: Strength of radio wave is weak.
Graph 2: Strength of radio wave is middle
Wireless LAN icon
Graph 3: Strength of radio wave is strong
z It is used when wireless LAN module is mounted. It is not displayed
when wireless LAN module is not mounted.
z Is displayed during wireless LAN communication.
z It blinks during communication.
OFF: No link
ON: Link connection
Link icon
Blink: Roaming (*4)
z It is displayed when printer has received data. It is turned on from
the timing that printer receives the data from PC till printer
completes to process received data.
Data receive icon
ON: Receiving data or Processing received data
To Next Page
Loading...
