5. SYSTEM MODE EO18-33027
5.6 TEST PRINT
5-49
5.6.1.2 Print speed / PRINT SPEED
The selection of printer speed has variation depend on resolution of printer.
203dpi 305dpi
・ 3ips
・ 6ips
・ 8ips
・ 10ips
・ 12ips
・ 14ips
・ 3ips
・ 5ips
・ 8ips
・ 10ips
・ 12ips
・ 14ips
When the peel-off is selected as the issue type, the maximum speed becomes 10 ips if over 10 ips print
speed is selected.
5.6.1.3 Sensor / SENSOR
・ None / NONE
・ Transmissive / TRANS.
・ Reflective / REFLECT
・ Transmissive (Manual) / MANUAL TRANS.
・ Reflective (Manual) / MANUAL REFL.
5.6.1.4 Print method / PRINT TYPE
・ Thermal transfer / TRANSFR
・ Direct thermal / DIRECT
5.6.1.5 Issue type / ISSUE TYPE
・ Batch issue / NO CUT
・ Issue with cut / WITH CUT
・ Issue with peel-off / PEEL OFF
5.6.1.6 Label pitch / LABEL PITCH
Max. Min. Step Display Sign Integer
digit
Decimal
point
digit
0 fullfil Unit
999 0 1 Decimal Non 3 0 Non mm
5.6.1.7 Paper feed / PAPER FEED
・ Disable / NO FEED
・ Enable / FEED
To Next Page
Loading...
