5. SYSTEM MODE EO18-33027
5.11 RFID Module Setting
5-76
5.11.2.2 Country / COUNTRY
When module setting is “U2”, country which mounted module support is displayed.
When module setting is “U2”, “INVALID” message is displayed.
The country can be changed when module setting is “U2” and mounted module is EU/US.
This setting is protected by password to prevent setting by user since RFID radio frequency is changed
once this country setting is changed.
The following message is displayed depends on module setting and mounted module type and module
mount condition.
English
No module (No message)
H1/H2 (No message)
U2(No module) No RFID Module
U2(After country setting) [ENTER] for Setting
U2(No country setting) Need Setting for use
[ENTER] for Setting
U2(Japan/China) Cannot change COUNTRY
Setting.
5.11.2.3 Tag type / TAG
The display content of tag type varies based on module setting.
The following number of table is the display order of scroll line.
NONE H1 H2 U2
NONE 1 1 1 1
I-Code 2 2
Tag-It 3 3
C220 4 4
ISO15693 5 5 2
C210 6 6
C240 7 7
C320 8 8
EPC C1 Gen2 9 2
To Next Page
Loading...
