Toshiba B-EX4 - Page 18

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
(Revision Date: Aug. 24, 2011)
4.1 DISC CUTTER (B-EX204-QM-R)
4- 3
4. Fully open the Top Cover.
5. Release the tab on the right end by pushing it, then remove the Front Panel.
4.1.2 Mounting the Cutter Unit
1. Turn the Head Lever to FREE position and open the Ribbon Shaft Holder Plate.
Top Cover
Tab
Front Panel
Ribbon Shaft
Holder Plate
Head Leve
r