3. MAINTENANCE ENGLISH VERSION EO1-33114
3.1 Cleaning
23
3.1.1 Print Head/Platen/
Sensors (Cont.)
3.1.2 Covers and Panels
6. Clean the Print Head Element with a Print Head Cleaner or a cotton
swab or soft cloth slightly moistened with alcohol.
7. Wipe the Platen, Feed Roller, and Pinch Roller with a soft cloth
slightly moistened with alcohol. Remove dust or foreign substances
from the internal parts of the printer.
8. Wipe the Feed Gap Sensor and Black Mark Sensor with a dry soft
cloth.
Wipe the covers and panels with a dry soft cloth or a cloth slightly
moistened with a mild detergent solution.
CAUTION!
1. DO NOT POUR WATER
directly onto the printer.
2. DO NOT APPLY cleaner or
detergent directly onto any
cover or panel.
3. NEVER USE THINNER OR
OTHER VOLATILE
SOLVENT on the plastic
covers.
4. DO NOT clean the panel,
covers, or the supply
window with alcohol as it
may cause them to discolor,
lose their shape or develop
structural weakness.
NOTE:
Please purchase the Print Head
Cleaner from your authorized
Toshiba Tec service
representative.
Paper sensor
Thermal Head
Platen
Feed Rolle
Pinch Rolle
To Next Page
Loading...
Need help?
General
